Note: This step has already been done for you if you purchased the SV-11 enclosure from DPC.

As with any of our projector models, if you don't have the tools or ability to cut the parts for your projector, that is no problem - we offer pre-cut enclosures and can even pre-drill the enclosure for you! If you wish to cut your own MDF panels to make the SV-11 enclosure, then here is a list of the panel dimensions that you will need.

• (3x) Front/Back/LCD -  11x9x1/2 inch
• (2x) Top/Bottom - 22x12x1/2 inch
• (2x) Sides - 22x10x1/2 inch

Once you have each of these panels cut to the right dimensions, you are nearly ready to assemble your projector. The next step is to cut holes for the LCD, fans, and projection lens.

© 2002-2005 DIY For Life Inc